Send Inquiry

Request To Call Back

648 Retaining Compound Adhesive

Get a Price/Quote

648 Retaining Compound Adhesive Specification

Holding Power
High Retention Power

Storage Temperature
Below 25C

Form
Liquid

Tensile Strength
up to 25 N/mm

Hardness
Shore D > 60

Shelf Life
12 months

Material
Anaerobic Adhesive

Features
High Strength, Oil Tolerant, Gap Filling

Packaging Size
50ml, 250ml bottle

Types Of Chemical
Methacrylate Ester

Adhesive Type
Anaerobic Retaining Adhesive

Surface Of Application
Metal surfaces

Other Names
Retaining Compound

Usage
Industrial bonding and sealing

Grade
Industrial Grade

Purity
99%

Application
Retaining parts such as bearings, bushings, cylindrical parts

Color
Green

Physical State
Liquid

Full Cure Time
24 hours

Operating Temperature Range
-55C to +150C

Breakaway Torque
16 - 22 Nm

Viscosity
400 - 600 mPa.s

Service
Suitable for dynamic and static loads

Glue thickness
Recommended 0.1mm - 0.25mm

Chemical Resistance
Excellent against most oils and solvents

Curing Mechanism
Anaerobic (air-exclusion required)

Density
1.08 g/cm3

Fixture Time
10 - 30 minutes

About 648 Retaining Compound Adhesive

The Retaining Compound 648 that we offer is formulated in adherence to industry laid standards and guidelines. Offered adhesive is known as accurate composition of effective compounds. Our compound is widely used in applications such as holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts. Apart from this, offered Retaining Compound 648 is safely stored and cross examined at our premises so as to leave no scope for even minute defect in the range.

Features:

High strength retaining sealant
Accurate composition
High effectivenes

Applications:

Retaining
Adhesives Retaining Cylindrical Assemblies
Close Fitting / Press Fit
Retaining For Metal & Plastic Parts
Retaining For Metal Parts
Retaining For Plastic Parts

Product details

Features	Heat Resistant,Impact Resistant,Moisture Resistant,Vibration Resistant
Grade Standard	Industrial Grade
Surface of Application	Plastic,Wood

Advanced Retention for Industrial Applications

648 Retaining Compound Adhesive is engineered for robust bonding in demanding environments. Its anaerobic curing mechanism enables reliable retention of cylindrical metal assemblies, facilitating the maintenance and enhancement of mechanical resilience in dynamic and static setups. Suitable for use in factories, workshops, and repair centers, this adhesive guarantees performance even where exposure to oil and solvents is unavoidable. The products strength and chemical resistance make it a preferred solution among engineers and industrial maintenance professionals.

Reliable Performance in Extreme Conditions

Experience peace of mind with 648 Retaining Compound Adhesive, tested for performance from -55C up to +150C. The high-strength, oil-tolerant formula ensures that bonds retain their integrity under thermal fluctuations and mechanical stress. Its gap-filling capability (0.1mm to 0.25mm) ensures uniform adhesion, vital for precise engineering work and long-lasting assemblies. This adhesive is especially suitable for industrial environments in India and abroad where temperature tolerance, chemical resistance, and high holding power are essential.

FAQs of 648 Retaining Compound Adhesive:

Q: How should 648 Retaining Compound Adhesive be applied to ensure effective bonding?

A: For best results, thoroughly clean and dry the metal surfaces to be joined. Apply a thin, even layer of the adhesive to the components, ensuring the recommended glue thickness of 0.1mm to 0.25mm. Assemble the parts and hold them in place for the fixture time (1030 minutes) to allow initial set.

Q: What are the key benefits of using 648 Retaining Compound Adhesive for industrial applications?

A: The adhesive offers high retention power, excellent resistance against oils and solvents, reliable gap-filling capacity, and sustained performance across a wide temperature range. Its anaerobic, oil-tolerant formulation ensures secure metal bonding in both dynamic and static loads.

Q: When can bonded assemblies be put into full service after application?

A: Assemblies bonded with 648 Retaining Compound Adhesive should be allowed to cure for 24 hours to reach full strength and optimal retention. Initial handling strength is typically achieved after a fixture time of 1030 minutes.

Q: Where is 648 Retaining Compound Adhesive most effectively used?

A: This product excels in industrial environments, including assembly lines, maintenance workshops, and repair centers. It is ideal for retaining cylindrical metal parts such as bearings, bushings, and gearsespecially where exposure to oils and solvents is likely.

Q: What is the recommended storage process for maintaining the adhesives quality?

A: Store the adhesive in tightly sealed containers below 25C, away from direct sunlight and moisture. This helps preserve its high purity and extends the shelf life up to 12 months.

Q: How does the curing process of this adhesive work?

A: 648 Retaining Compound cures anaerobically, meaning it sets in the absence of air when surrounded by metal surfaces. The curing process begins after assembly and continues until full strength is achieved within 24 hours.

Q: What makes 648 Retaining Compound Adhesive a preferred option over other adhesives?

A: Its unique combination of high tensile strength, oil tolerance, gap-filling capability, and outstanding chemical resistance provides superior reliability for retaining and bonding metal partsensuring durability and long-lasting performance in industrial settings.

Tell us about your requirement